Air slide sampler
Operating Behavior & Mechanical Characteristics
Air slide sampler rank amongst those samplers that remove a selective sample from the material flow of an air slide conveyor system. To be able to secure sufficient representativeness, the product flows to be sampled must be homogeneous in terms of the conveyor width. Sampling is carried out by a sample collecting pipe protruding in the material flow that is provided with openings. Normally, these openings are turned in the direction of conveyance and close against a sealing gasket. At the time of sampling, the sample collecting pipe with its openings is turned against the direction of conveyance, so that sampling material can flow in. The sample material thus entered is discharged downwards through the air slide conveyor system by means of the sample collecting pipe.
Technical specifications
| Air slide sampler | RPN 50/480 | |
|---|---|---|
| Diameter of the collecting pipe | mm | Ø 50 |
| Sample volume approx. | cm³ | 250 |
| Weight | kg | 20 |
Accessory Sampling
A wide range of accessories is available for all SIEBTECHNIK TEMA sampling equipment. Based on long years of experience SIEBTECHNIK TEMA ensures optimum results for your tasks.
Apart from sampling equipment made up of downpipes and air slide conveyor systems, you can also obtain from us samplers for representative sampling of moved bulk materials, e.g. obtained from conveyor belts. We likewise offer you complete sample preparation plants with dividing equipment, crushers, sampling equipment, …
Should you want to combine several sampling units by means of a pneumatic post system, we are also able to offer you here a solution customised to your requirements right up to fully automatic laboratory preparation.
Advantages
Sampling from the material stream
Low-wear and low-maintenance design
