Airjet screen SLS
Airjet screen SLS
The new SLS 200 for fast, precise and reproducible particle size analysis of all dry screened materials in the laboratory and in production monitoring.
With an analysis range from approx. 20 to 4000 μm, for sample quantities of up to approx. 500 g, depending on material density.
The air jet necessary for the exceptionally good dispersion, is generated by a vacuum cleaner and directed through the slotted nozzle rotating below the analytical sieve surface.
In order to reduce the screening time and to achieve more precise screening, the shape of the slot nozzle has been lengthened and extended with an additional edge dispersion, which ensures a double loosening of the edge area with each revolution and thus a faster screening result compared to conventional nozzles.
The airjet screen is simple and intuitive to operate via an app.
The fines are drawn through the sieve openings into the container of the vacuum unit and collected. The vacuum required for this as well as the screening time can be preset via the app and can be saved using SOPs.
With the stainless steel housing and the stainless steel intake of the screen, the unit can withstand even the toughest applications.
Accessory
The following options are available for the SLS 200:
- Vacuum unit
- Mobile supports with and without sound absorbing housing for the vacuum unit
- Cyclone
- Adapter set for holding sieves of diameter 400 mm, for screening larger quantities
Technical specification
Airjet sieve | SLS 200 | ||
---|---|---|---|
Dimensions (W x H x D) | mm | 326 x 276 x 468 | |
Weight | kg | 22 | |
Test sieve diameter | mm | 200 (optional 100 & 400 mm) | |
Test sieve opening size | µm | 20 - 4000 | |
Drive of the slot nozzle | A.C. gear motor, 22 rpm | ||
Connection | 110 V - 230 V, 1/N/PE, 50/60 Hz | ||
Mains power connection, vacuum cleaner connection exhausting socket and appliance socket for the vacuum cleaner are located at the rear. Subject to technical changes. |
Innovative app control
- Standard Operating Procedures (SOP), formula management
- Display of grain size distributions (Rosin-Rammler and linear diagram)
- Coupling of analytical balances with optional
- RS 232 dongle
- Accessing the operating instructions
Automatic vacuum control
USB connection
Optional ionization unit
- for avoiding/reducing agglomerate formation during screening, especially of plastics, due to electrostatic charging
Optional air pre-warming
- for avoiding/reducing water absorption of hygroscopic substances during screening
Downloads
Airjet screen SLS 200Sample Preparation in the Laboratory
SIEBTECHNIK TEMA - One Solution. Worldwide.