Piston sampler, Type KoPN
Operating Behavior & Mechanical Characteristics
The piston sampler ranks amongst those samplers which remove a selective sample from the material flow. To be able to secure sufficient representativeness, the product flows to be sampled must be homogeneous in terms of the various grain sizes. Sampling is carried out by means of a sample collecting pipe protruding in the material flow. This sample collecting pipe is provided with an opening, into which the material can drop permanently. At the time of sampling, a pneumatically actuated piston is pressed from the waiting position in the direction of the material flow by the sample collecting pipe. The sample collecting pipe is emptied over the material flow to then, on the return, take along the sample material just dropped in. The sample material can be taken over at a pipe socket outside the main pipe.
Technical specification
Piston sampler | KoPN 50/250 | |
---|---|---|
Diameter of the collecting pipe | mm | Ø 50 |
Sample volume approx. | cm³ | 250 |
Weight | kg | 15 |
Accessories for screening machines
There is a comprehensive range of accessories available for all SIEBTECHNIK TEMA screening machines. Whether it’s a spraying system, wear protection, counter-vibration frame, air suspension, dust guard, dust covers, drive consoles, double unbalance gear units, hybrid suspension or special screen cloths – thanks to its decades of experience SIEBTECHNIK TEMA gets you the best result for your requirement
Naturally our machines can be perfectly combined and offer the optimum solution as a package.
Ask us, we’re there for you.
Advantages
- Sampling from the material stream
- Low-wear and low-maintenance design